FERM PLANER 82MM 620W | PPM1015P Get the best results with the FERM PPM1015P planer! If a plank or beam turns out to be one millimetre too thick, this is too much to sand, too little to cut, but enough to plane. The professional FERM PPM1015P can be used for planing or shearing doors, making rebates and chamfering corners.   Details Get the best results with the FERM PPM1015P planer! If a plank or beam turns out to be one millimetre too thick afterwards, this is too much to sand, too little to cut, but enough to plane. The professional FERM PPM1015P can be used for planing or shearing doors, making rebates and chamfering corners. The PPM1015P has a powerful 620W motor and reaches 17.000 rpm. Thanks to the stable aluminium base plate, you can easily plane your wood. Enjoy optimal working comfort thanks to the soft grip on the handle, 3m long rubber cable and the use of the lock-on switch. The side guide can be used to plane wood at right angles and to adjust any rebating width (0-9 mm). Adjustable planing depth 0-2mm Lock-on switch Resharpable blades Aluminum front and rear plate with edging slit 3m rubber cable   Specs BRAND FERM RATING Industrial MOTOR TYPE Brushed INPUT POWER 620W NO LOAD SPEED (1ST) 17000rpm DEPTH OF CUT [WOOD] 2mm PLANER WIDTH 82mm REBATING DEPTH 0.9mm CARRY CASE No Carry Case WEIGHT (KG) 2.8000   Included 1 x Planer 1 x Parallel guide 1 x Wrench 1 x Blade sharpening support 1 x Blade adjusting block